High-speed performance requires uncompromising construction and engineering. Scott Office Systems cuts no corners with the Ten Thousand™. The steel weldment base stands like a boulder on uneven floors. The 2-horsepower motor and heavy-duty power train operate at full speed without the machine shaking or rattling. There is no other tab machine that performs so well, for so many years.

Smooth Bonding Ten sets of heat rollers and two sets of non-heat rollers bond the plastic to various thicknesses of paper. Special heat controllers reach and maintain an accurate temperature. Just dial-in the adjustments to get the heat settings you want, or turn off the heat switch and use the Ten Thousand™ as a high-speed tabcutter only.

Heavy Duty Construction The 750 lb steel weldment base stabilizes the machine as it cuts up to 10,000 plastic tabs per hour.

Accurate Counts Set the counter for up to 999,999, push the start button and the Ten Thousand™ performs long and short runs with breathtaking speed and precision. The instant the counter reaches the preset number, the Ten Thousand™ stops so there are never any costly overruns.

Waste-Free Runs When the machine runs out of tape, it immediately stops feeding paper so there is no spoilage or costly waste. It takes just a few minutes to thread a new tape reel so no time is wasted on long setups.

Trouble Free Operation A durable electric clutch and brake keep the plastic feeding smoothly. Pre-set plastic length dimensions automatically center the tape on the heated rolls.  The Ten Thousand™ uses a set of highly wear resistant, steel knives. The standard size is 1/2" (12.7 mm). Five different size sets are available from Scott.