Speed	Up to 5,000 tabs per hour
Sheet Size	Maximum: 15 inches with a half inch inset on a 1 inch tab (381mm with a 12.7mm inset cut on a 25.4mm tab) Minimum: any width x 5-1/2 inches (139.7mm minimum depth)
Paper Weight	6-point to 25-point paper
Tab Cut Size	6 inches (152.4mm) maximum 1/2 inch (12.7mm) minimum Stepcut: 13-1/2 inches (342.9mm) maximum
Knives	Hardened, precision ground steel
Standard Knife Sizes	1/4", 3/8", 1/2", 5/8", 3/4" (6.3mm, 9.5mm, 12.7mm, 15.9mm, 19.1mm)
Electrical Requirement	0.5 amp, 120 VAC, 50-60 Hz
Air Requirements (ETC requires no air).	2 cubic ft. per minute (944 cubic cm per second) at 80 lbs. pressure. Built in pressure regulator and filter allow use of shop air or separate compressor, permits variations in cutting power.
Lubrication	Fully Automated
Table Top	48 inches x 15-3/4 inches x 3/8 inches